Izdelki za plastična 10mm cev (12)

PTFE-fiber with PTFE Impregnation and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Tank lid, door and lid seal Suitable for Static applications Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

Konstruktionsrohre, Stahl / Aluminium / Edelstahl, für Rohr-Klemmverbinder Ausführung in Stahl ST verzinkt, blau passiviert ZB Ausführung in Aluminium AL • blank, unbehandelt BL • eloxiert, naturfarben EL Ausführung Edelstahl nichtrostend, 1.4301 NI blank, unbehandelt BL Sägeschnittfläche entgratet blank, d.h. nicht oberflächenbehandelt Artikelnummer:GN 990-AL-V12-100-BL Gewicht:12 d1:- d2:9 l ±0.5:* s1:V 12 s2:9 w1:1.5 w2:1.5

Feinblasiger Rohrbelüfter mit einer effektiven Begasungslänge von 1.000 mm mit einer Membrane aus besonders belastbarem Polyurethan und einem PP-Stützkörper mit einem Anschlußgewinde R1“ IG. Extrem lange Lebensdauer. Besonders reiß- und abriebfest Weichmacherfrei, daher kein Aushärten der Membrane. Die Membranen ist mikroben- und hydrolysefest und weist eine gute Öl-, Benzin- und Chemikalienbeständigkeit auf. Gesamtlänge 1.070 mm. Für alle gängigen Rund- und Rechteckrohrleitungen sind Adapter verfügbar. Präzise Perforation für hohen Sauerstoffeintrag und geringen Druckverlust. Geeignet für permanenten und intermittierenden Betrieb. Umweltfreundliches, robustes und geflutetes Stützrohr aus Polypropylen. Andere Längen verfügbar. Vollständige Detailbeschreibung anzeigen Weniger anzeigen Aktive Länge:1.000 mm Belastbarkeit:Sehr hoch Belüftertyp:Rohrbelüfter Belüftung:Intermittierend und permanent Blasengröße:Feinblasig Druckverlust:Gering Herkunft:Deutschland Markenname:EMR20-PUR Membranmaterial:Polyurethan Sauerstoffeintrag:Sehr gut Stützkörpermaterial:Polypropylen Ursprungsland:Deutschland

IHB konfektioniert PTFE Glatt- und Wellschläuche

Maßgefertigte PE Tuben • DURCHMESSER: von 19mm bis 50mm • LÄNGE: von 68mm bis 210mm • WEISS oder GEFÄRBT • OFFSET: bis zu 6 Farben • FLEXO: bis zu 6 Farben • SIEBDRUCK: bis zu 6 Farben • FLEXO & SIEBDRUCK: Kombi-Druck bis zu 9 Farben • LACK: glänzend, matt, halbmatt, Soft-Touch, Selektivlack • HOT STAMPING: glänzender oder matter Effekt

Frameless Shower Hardware Shower Stabilizers

ZZ-Schalungsrohr (Ø 75, Länge 100 mm)

Precision Ceramics has introduced a new and exciting range of advanced ceramic tubes and insulators ideally suitable for thermocouple protection in high temperature measurement applications. The alumina-based tubes are used throughout many industries to aid monitoring the stability and performance of production processes especially those within hostile and aggressive chemical environments at temperatures up to 1,700°C. They are manufactured to DIN V ENV 12212 and are very strong, organically inert and well proven in a wide field of applications.

zweilagig, fadenverstärkte PVC-Wand, schwarz Einsatztemperatur: 0 °C bis +85 °C Material: - Wand: zweilagig, fadenverstärktes PVC - Spirale: kunststoffummantelte Federstahlspirale Eigenschaften: - gute Öl-, Laugen- und Säurefestigkeit - strömungsoptimiert - UV und ozonfest - sehr flexibel und leicht Einsatz : - Haushalts- und Industriesauger Lieferformen: - Ø 25 bis 70 mm - 15 m/Rolle - Ø 76 bis 160 mm - 10 m/Rolle - Farbe: schwarz Weitere Ausführungen: - Farbe: grau Auf Anfrage: - Kurzlängen - konfektioniert nach Kundenwunsch

Armaglass Intotech 225 A reinforcement mesh in alkali-resistant fibreglass weighing 225 g/m2, with a 25 x 25 mm square mesh and thermosetting primer equal to about 10% of total weight. Easy and quick to apply, to handle and to cut. It combines lightness and thinness with excellent mechanical characteristics in the warp and weft. Resistant to atmospheric agents and aggressive environments. Suitable for any substrate and perfectly compatible with both cement- and lime-based mortars. Armaglass Intotech 225 is a mesh used for the reinforcement of high thickness plasters and screeds, with a uniform absorption and redistribution function of mechanical stresses and shrinkage stresses. The mesh therefore performs an important anti-cracking function on plasters and screeds. It is the ideal plaster base for our products based on natural hydraulic lime: Sanatigh, Sanawarme, Caleosana, Sanascreed and for osmotic thickening waterproofing products Osmocem MR and Osmocem RD. To prepare the substrate, carefully follow what is indicated in the technical data sheets of the product with which the Armaglass Intotech 225 mesh is combined. To facilitate collaboration with the support, Armaglass Intotech 225 can be coupled and is perfectly compatible with any type of connector (in fiberglass, resin or metal). Application on masonry: If the use of connectors is envisaged, proceed with the creation of holes of suitable diameter, depending on the selected connection system, arranged according to the design indications. Fix the connectors with anchoring resin (Syntech Profix or alternatively SYNTECH EPOXY 21) or grout based on hydraulic binders (Grout Cable or alternatively Sanafluens). Apply a first layer of mortar (see technical data sheet of the chosen product), lay the Armaglass Intotech 225 mesh on the still fresh mortar, taking care to guarantee at least 10 cm on the overlaps, lay the second layer of mortar. Application on screeds: Apply a first layer of screed (see technical data sheet of the chosen product), lay the Armaglass Intotech 225 mesh partially drowning it on the first layer of still fresh screed, taking care to guarantee at least 10 cm on the overlaps, laying the second layer of screed. Packaging: Roll of 50 m2 UM: €/m2

robolink® connecting tubes d26 Customized assembling (length) Inner contour (anti-twist device) Feedthrough of ropes and pneumatic hoses, cables Corrossion-resistant Light Stable robolink® multi-axis joint robolink® Configurator

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...